GT Control Setup Instructions.

To use the GT Control software first make sure that your MIDI guitar is set to output to MIDI channels 1-6 or 11-16. If your MIDI guitar is not set up this way you may only get one string to light on your Fretlight guitar. With your MIDI guitar turned on and plugged into your computer and the Fretlight guitar plugged into your computer, launch the GT Control software and select your MIDI guitar in the "MIDI Device" drop down menu. Then play some notes on your MIDI guitar and you should see the "MIDI" icon in the GT Control software blink indicating the program is receiving a MIDI signal. Anything you play on your MIDI guitar should now show up on the connected Fretlight.

Have more questions? Submit a request


Article is closed for comments.
Powered by Zendesk